MCR A

4.1.1 JP

4.1.1 JP

ravels
X-axis travel (table front/back) – 3200mm (option: 4200mm, 5200mm)
Y-axis travel (horizontal spindle) – 2500mm (option: 3000mm)
Z-axis travel (vertical ram) – 650mm
Crossrail (vertical crossrail) – 700mm (option: 1000mm)
Effective width between columns – 2050mm (option: 2550mm)
Table to spindle nose – 0~1350mm (option: 0~1650mm)
Table
Working surface (widthxlength) – 1500x3000mm (option: 1500x4000mm, 1500x5000mm, 2000x3000mm, 2000x4000m, 2000x5000mm)
Max load capacity – 10000kg (option: 13000kg, 16000kg, 14000kg, 18000kg, 23000kg)
T-slot widthxNo. – 20H7x11mm
Height from floor – 750mm (option: 800mm)
Spindle
Spindle speed – 30~4000min-1 (option: 30~6000min-1)
Tapered bore – 7/24 Taper No.50
Bearing dia – ø100mm (option: ø85mm when 6000rpm)
Feedrate
Rapid traverse – X-Y: 20m/min; Z: 10m/min
Cutting feedrate – 0.001~10m/min

Crossr

Motors
Spindle drive (30min/cont) – VAC22/18.5kW
ATC
Tool shank – MAS BT50
Retention knob – MAS P50T-2
Tool magazine capacity – 50 tools (option: 72, 100, 120, 180)
Max tool diameter (with adjacent tools) – 135mm
Max tool diameter (without adjacent tools) – 230mm
Max tool length – 400mm
Max tool weight – 25kg
Tool selection – Fixed address
Machine dimensions
Height – 5175mm
Floor space (machine only) – 5560x8350mm (option: 5560x10730mm, 5560x12920mm, 6060x8730mm, 6060x10730mm, 6060x12950mm)
Nett mass (machine only) – 35000kg (option: 37500kg, 40000kg, 43000kg, 45000kg, 47000kg)
Tail traverse – 1m/min